Call us: +91 - 9925460107

D+ FIX TILE ADHESIVE GP 1000

Benefits

dry powder, easy to handle, stable

Features

available in two colours: white and grey

Uses

adhesion of tile, reduce water prmeability, impart flexibility

Surface preparation:
Clean the groves by removing the dust and dirt. 
Application:

1. Spread not more than 1 sq.m. at a time, apply the adhesive to the floor surface.
2. Comb the adhesive to the required depth (between 3-6mm) using a suitable trowel.
3. Press the tiles firmly into position with a slight twisting action, checking periodically that good contact is maintained with the back of each tile. Leave no voids behind tiles when solid-bed fixing.
4. Tiles should be fixed within 10 minutes of adhesive being applied, depending on the porosity of the surface and atmospheric conditions. Tiles can be adjusted up to 5 minutes after fixing. Touch the adhesive ribs periodically and if a skin has formed, remove the adhesive and apply a new layer.
5. Leave adequate joints between individual wall and floor tiles unless self spacing tiles are used.
6. Clean off surplus adhesive from the tile face and between joints.
7. Do not use in damp conditions.

precautions:

Keep out of reach of children, Wear suitable protective clothing. gloves and eyes/face protection. After contact with skin, wash immediately with plenty of clean water. In case of contact with eyes rinse immediately with plenty of clean water and seek medical advice.

Other Products Range

DFR 113/ DFH 258
Read more...
Fixseal White
Read more...
FIX SEAL FAST
Read more...

Send Email / SMS Enquiry

D+ FIX TILE ADHESIVE GP 1000

Get In Touch